Model Capacity Base Weight Length Tail Length Deck Axles Tires and Ply Rating
930D-45-12 35 Ton 17,265 lbs. (+/- 3%) 45 12 102x 35’3 2 (8) 235/75R 17.5 LRJ Double Coin
930D-48-12 35 Ton 17,660 lbs. (+/- 3%) 48 12 102x 38’3 2 (8) 235/75R 17.5 LRJ Double Coin
930D-48-15 35 Ton 18,770 lbs. (+/- 3%) 48 15 102x 38’3 2 (8) 235/75R 17.5 LRJ Double Coin
930D-51-15 35 Ton 19,250 lbs. (+/- 3%) 51 15 102x 41’3 2 (8) 235/75R 17.5 LRJ Double Coin
  • Suspension: Neway Air Ride RLU228, 22,500 lb. Capacity with Manual Dump Valve
  • Undercarriage: Centralized Grease System
  • Axles: (2) 25,000 lb. Axles, Dual Tire, Oil Bath Bearings, Outboard Brake Drum, Automatic Slack Adjusters
  • Axles Prepped for Air Inflation
  • Brakes: 12.25×7.5 Full Air / Spring Brakes ABS, 4S2M
  • Tires: 235/75R 17.5 LRJ Double Coin Tires
  • Rims: 17.5×6.75 Tubeless
  • Wheels: Hub Pilot / Steel Outboard Brake Drums
  • Oil Seal Hubs: Internal Mated Assembly
  • Air / Electrical: 7 Way Receptacle
  • Lights: Grote MicroNova LED Clear Lens-Enhanced Stop, Tail & Turn; Rear Amber Strobe-10 Year Warranty
  • Wiring Harness: Grote “Xtreme” Wiring Harness (7-Year Warranty)
  • Hydraulic Hook Up: Quick Couplers / 2,500 PSI – 20 GPM at Controls, 50 GPM Max
  • Hydraulic Winch: Upper Deck 12,000 lb. Worm Gear with 8 of 1/2 Cable with Wear Plate
  • Hydraulic Valve Body: Rexroth
  • *Capacity: 35 Ton (70,000 lbs.)
  • Deck Rating: 50,000 lbs. in 10
  • Estimated Base Weight: 16,300 lbs. (48) +/-3%
  • Main Frame: Fabricated 80,000 PSI Yield 4-Beam Design
  • Crossmembers: 4 Junior I-Beam and 3 Junior I-Beam on 8 Centers
  • Slope Drop: 90°
  • Parking Stands: Jost Two Speed Landing Gear
  • Pin Setting: 18
  • Swing Clearance: 84
  • Hitch: Fifth-Wheel Kingpin
  • Deck Width: 102
  • Loaded Deck Height: 38
  • Loaded Ground Clearance: 20
  • Decking: 1-3/8 Nominal Apitong (Lower Deck)
  • Tool Box: Twin Upper Deck Mounted Top-Opening with Non-Weight Bearing Lid Illuminated
  • Tie Downs: Double Key Hole Chain Slot / Gotchas on 16 Centers / (6) Double Keyhole Chain Slots on Tail / (2) D-Rings Lower Slope at Deck
  • Tail Lifting Capacity: 24,000 lb.
  • Load Angle: 11° with 15 Tail
  • Features: Automatic Slack Adjusters, Flat Approach Plate, Apitong Wood Covered Tail, Center Deck Keyholes on Tail, Bolt-On Traction Plate Over Approach Plate

Gallery

Landoll 930E